ACL 6500 Staticide ESD Safety Shield Aerosol
The reliable performance of Staticide ESD Safety Shield is now available in a convenient aerosol spray. This static electricity problem solver will not wash off like anti-static topicals. The advanced water-based formula reduces tribo-charging and dissipates static at a safe rate regardless of humidity and without reapplication.
New Generation Zero-Ion Contamination Tester
The Zero-Ion automatically removes and detects contamination on an electrical assembly or bare board and provides quantitative contamination measurements.
The Zero-Ion uses a dynamic technology that provides automatic regeneration of the machine's test solution, maintaining a high degree of test solution sensitivity. The Zero-Ion meets the requirements of military and commercial cleanliness testing standards including MIL 2000A, IPC test method 001, MIL-C-28809, MIL-P-55110 and IPC TM650-2.3.26.
AP2 has Tg of 250oC, X,Y and Z CTE of 13-15 ppm/oC and 30 ppm/oC respectively, a low 0.75% expansion from 50 to 260oC, peel values over 8 lb/in, low water absorption (0.15%) and improved thermal conductivity (0.4 to 0.5 W/mK). Contact Arlon at (909) 987-9533 for additional information.
Arlon's TC350 is designed with controlled Dk and low loss where thermal conductivity is critical. Historically, microwave products have controlled Dk and loss In higher power applications demand has developed for enhanced thermal management.
TC350 is a "Best in Class" product with df 0.002 at 10 GHz, thermal stability of dielectric constant -9 ppm/oC, CTE(X,Y) 7 ppm/oC, and CTE(Z) = 23 ppm/oC). Low TCEr makes TC350 a best in class product in terms of phase stability. Thermal conductivity of 1.0 W/mK.
The AquaTherm, from Austin American Technology, introduces a new era in Batch Cleaning. Forget the limitations of the past and experience a batch system that offers multiple cleaning technologies for capability previously unachieved in a compact footprint. The AquaTherm brings flexible, unparalleled cleaning performance to the batch Process.
-Multiple Cleaning Technologies for Process Flexibility
-Versatile - Removes Ionic, Particulate and Organic Residue
-Rinses to Programmable Ionic Level
-Energy and Space Efficient
-Low Cost of Ownership
-High Wash Temperature with Steam Cycle Cabalility
-Cleans with Water or Aqueous-Compatible Chemistries
-User-Friendly Operator Interface
Friendly Green Wipes
Friendlygreen.org will premier its newest line of environmentally friendly products at the upcoming APEX 2009 exhibition. The line is a perfect "GREEN" drop-in replacement to Kimwipes(tm), which contain little or no recycled resources.
Friendly green wipes are low linting, very absorbent, soft and will not scratch. They are excellent for light duty tasks and delicate surfaces. Because the wipes are low in lint and chemical extractables, they will leave surfaces very clean. They are made of 100% recycled cellulose.
Pyramax 100A
The Pyramax 100A features 100 inches of heated length and eight zones, 350C - 662F maximum temperature, flexible platform configuration, low power consumption, and a comprehensive menu of options. The oven provides excellent thermal uniformity through BTU’s exclusive closed loop convection control in addition to extremely low operating costs. The combination of high yield and low running costs provides a tremendous cost of ownership advantage.
Chemcut's New 2320 Etching System in the 2300 series product line: click for website
New 2320 Cupric Chloride Etcher with regeneration.
New 2320 Stripping System with integrated resist particle filter
Chemcut's new 2320 photoresist stripping system features a 20 inch wide conveyor, integrated single body construction and built-in particle filter.
New 2320 Photoresist Developer
The 2320 resist developer features a 20 working width conveyor, integrated single body contruction, oscillating spray and two stage rinse.
Datapaq's new Easy Oven Setup (EOS) software is an easy-to-use software program that automatically calculates the best reflow oven settings based on product and process limits that users set. A newly developed search engine processes thousands of oven settings before recommending the best options to the user. Simply run your product through the oven to create a profile, enter the process limits and EOS calculates the optimal recipe. Oven setup-time is reduced by more than half and the recipe is right the first time. Eliminate the need to conduct repeated trial and error experiments and establish your oven recipe effortlessly.
Offering the 50T, HS60 and SPI 2500!
Easy Braid Co. is now offering Solder Paste Inspection Equipment. For complete details, brochures and demonstration information, visit our website.
New High Resistant, Low-Tack LDI Soldermask from Electra Carapace EMP110 LDI is an aqueous developing, laser direct imaging (LDI) soldermask suitable for high-reliability, HDI PCB production.
-Low energy requirements of only 50 - 100mJ/sqcm
-Low surface tack during laser imaging
-High resistance to low solids fluxes and lead-free solder processes
-High Resistance to ENIG and Immersion Sn
-Fine solder dam resolution (50-75 micron, 2-3 mil)
-RoHS Compliant
Visit our website
EM55 Peelable Mask for Lead-Free Processes
The Ultimate Peelable for Lead-Free Applications, EM55 LF is formulated to provide excellent resistant to lead-free hot-air solder level and multi-stage lead-free assembly processes. Even after multiple heat stages EM55 LF remains flexible and easy to remove.
Visit our website
Demonstration: Advanced Rework Applications
FINETECH’s rework machines in the booth will focus on three areas: 1. Residual solder removal is used for site dressing after the removal of SMD components or for clea¬ning BGA interposers before reballing. 2. Direct component paste printing showing a simple and reproducible method integrated directly into the rework tool. 3. Reballing to restore BGAs and CSPs back to original condition.
S-HDR
S-HDR is a new exciting feature that Hirox has developed.
S-HDR is Super High Dynamic Range, it allows for a greater range than normal digital imaging. S-HDR blends multiple exposures to create a high dynamic image. Areas that would have been too dark in one exposure are replaced with that area from a brighter exposure and vice versa. The result is an overall more detailed image. S-HDR gives the appearance of a greater depth of field. It also has several options to customize. S-HDR lets you "see what could not have been seen".
INOVISION: A New SaaS Offering
Inovaxe's newest offering, INOVISION, features a modular design that contains all of the inventory control feature and functionality of INOKIT plus state-of-the-art supply chain management tools including material requirements planning, alternate planning tools such as a MIN/MAX dashboard, as well as a dispatch shipping module. As a "Software as a Service" (SaaS) offering, customers can receive a full functionality, on demand, INOVISION MRP system for one reasonable monthly subscription price, scalable based on the needs of the customer.
Reflow Process Inspection (RPI)
The RPI is an in-line process inspection system for SMT reflow ovens. The system is embedded inside the reflow oven and checks the profile for each and every product processed through the oven to verify whether the profile is in spec. On a daily basis, the system will generate two charts: DPMO and Process Yield for the thermal process.
StencilLaser P6060
The Stencil Laser P 6060 is a fully enclosed laser cutting system for the production of SMT stencils. The system features a simplified user interface with easy-to-learn software.
ProtoLaser U
The ProtoLaser U is a fully automated UV laser depaneling and routing system for PCBs.
StencilCheck Software
StencilCheck is and automatic optical inspection system for solder paste stencils.
Learn more at: lpkfusa.com
SN100C Products
Nihon Superior will showcase an expanded range of SN100C products this year.
-SN100C P600 is a halogen-free high-reliability no-clean lead-free solder paste, designed as a high-reliability pasted.
-SN100C P520 is a high-reliability no-clean paste optimized to deliver good reflow with chip components.
-SN100C P500 is a general purpose high-reliability no-clean lead-free solder paste.
-SN100C (040) and SN100C (030) are halogen-free high-reliability flux-cored lead-free solder wires that do not contain F, Cl, Br and I.
-NS-F850 is a rosin-based flux for lead-free wave soldering that ensures excellent wetting of all substrates.
HIROX Digital Microscopes
The HIROX Systems are dedicated digital microscopes, allowing a sample to be observed directly through a lens. The microscopes have been optimized for the characteristics of the imaging sensor: a flat, 2-D array with a known readout rate, response curve, pixel size, etc. Objects may be inspected dynamically in 360 degree with the patented HIROX design. Additionally, using the microscopes, superior BGA inspection is capable up to 200X magnification.
EnviroGuard Closed-loop Ultrasonic Stencil Cleaner
Smart Sonic's EnviroGuard is the first and only 100% closed-loop stencil cleaner that can clean all types of solder paste without discharging any waste to drain. Two independent filtration systems recirculate the wash and rinse for reuse. The unique rinse filtration system includes DI water quality.
440-R SMT Detergent for Manual Stencil Cleaning
Smart Sonic introduces a new line of low-cost ultrasonic stencil cleaners. The Series 500 Stencil Cleaners are designed for the SMT assembler that is cleaning low volume stencils and desires improved and consistent cleaning of fine-pitch stencil apertures and reduced stencil damage caused by manual cleaning
SonoFlux Servo
The SonoFlux Servo is a fully automated, highly flexible reciprocating spray fluxing system designed for manufacturers who run high-volume lines requiring frequent PCB width changes and the ability to run all flux types. Capable of fluxing PCBs from 2-24" board widths, the SonoFlux Servo features programmable selective fluxing capability, offering complete flexibility on a high-accuracy reciprocating platform. The SonoFlux Servo is easily installed into all wave solder machines and features user-friendly PLC Windows-based control of all process parameters through a graphical interface.
Series 400
VJ Electronix will unveil the newly expanded 400 Series Benchtop Rework Platform capable of addressing challenging Lead-Free Rework applications. The 400 Series is configurable with an arsenal of recently developed Rework solutions for site dressing and eliminating copper dissolution.